MOC3063

The main functions of the MOC3061, MOC3062, and MOC3063 devices are to simplify logic control of 115/240 Vac power, provide zero voltage crossing, and have a dv/dt of 1500 V/ µs typical, 600 V/ µs guaranteed. These devices are designed to be used with a triac in the interface of logic systems to power equipment from 115/240 Vac lines, such as solid-state relays, industrial controls, motors, solenoids, and consumer appliances.

The maximum off-state output terminal voltage for the output driver in the provided document is 600 Volts .

The MOC3061, MOC3062, and MOC3063 devices are recommended for use in the interface of logic systems to equipment powered from 115/240 Vac lines. Some applications include solid-state relays, industrial controls, motors, solenoids, and consumer appliances. They simplify logic control of 115/240 Vac power and have a Zero Voltage Crossing feature. The devices have a dv/dt of 1500 V/ µs typical, with 600 V/ µs guaranteed. They are designed to work with a triac in various applications. Additionally, the optoisolator should not be used to drive a load directly but is intended to be a trigger device only. A typical circuit for use when hot line switching is required is provided, where the load is connected to the cold or neutral side. The devices have specific resistor and capacitor requirements for snubbing of the triac, depending on the particular triac and load used. In summary, the MOC3061, MOC3062, and MOC3063 devices are recommended for applications such as solid-state relays, industrial controls, motors, solenoids, and consumer appliances, where logic control of 115/240 Vac power is needed. They are designed to work with a triac and have specific requirements for proper usage in various circuits.